CRBH4510A
2019-04-10
-
Part NO.
Open type:CRBH4510A
With seal:CRBH4510AUU
-
Dimension
d:40mm
D:70mm
B:10mm
-
Mounting
-
Basic Load Ratings
Cr:8.86kN
Cor:11.3kN
-
Equivalent Model
Mass:0.16kg
- Features
- Mounting
CRBH4510A detail specifications:
Type of guide Roller Space retainer Yes Material GCr15 Standard lubrication method Grease lubrication Oil hole Yes Sealing Oil seal at both sides Radial clearance T1, C1, C2 Rotation accuracy P5/P4 Working temperature -20℃ ~ 80℃ CRBH4510A cross roller bearing features:
1. Integrated inner ring and outer ring, provide high stiffness.
2. Sustain radial, axial and moment loads at the same time.
3. High rigidity & rotation accuracy, compact structure reduce the influence by installation.
4. Thin-section, space saving and reduce the overall weight of the device.
CRBH crossed roller bearing catalog – BRS Bearing
CRBH4510A cross roller bearing installation instructions
Cautions: For crossed roller bearings, when the rigidity of the mounting parts is not sufficient, stress concentration will occur at the contact area between the rollers and raceways, and the bearing performance will be deteriorated significantly.
Therefore, it is necessary to carefully examine the rigidity of housing and the strength of fixing bolts when a large moment will be applied.
1. Before installation, please clean bearing bracket, shaft, or other components, make sure there is no burrs or rough edge.
2. Fix the inner and outer rings in the axial direction by using fixing plates, etc.
