CRBF8022AT crossed roller bearing specifications:

CRBF crossed roller bearing catalog

CRBF8022 face mount crossed roller bearing features:

1. With an integrated inner ring and outer ring, provide high stiffness
2. Sustain radial, axial, and moment loads at the same time
3. High rigidity & rotation accuracy, compact structure reduce the influence by the installation
4.Miniaturization. The inner ring and outer ring with mounting holes, so it can be easily mounted to a device with bolts without need for housing and fixing plate, so surrounding parts of the bearing can be made compact, which contributes to miniaturization and a weight saving of devices.

CRBF8022 Face mount crossed roller bearing rotation accuracy test (USP Grade)

CRBF8022AT crossed roller bearing installation instructions

CRBF8022ATUU Bearing Mounting Dimensions

da: 107mm

Da: 137mm

PCD1: 97mm

PCD2: 148mm

Inner ring mounting hole 10-M5 through

Outer ring mounting hole 10-φ5.5 drilled through, φ9.5 counterbore depth 5.4

Cautions: For crossed roller bearings with split outer ring, when the rigidity of the mounting parts is not sufficient, stress concentration will occur at the contact area between the rollers and raceways, and the bearing performance will deteriorate significantly.

Therefore, it is necessary to carefully examine the rigidity of housing and the strength of fixing bolts when a large moment will be applied.

1. Before installation, please clean bearing bracket, shaft, or other components, make sure there is no burrs or rough edge.
2.Fix the inner and outer rings in the axial direction directly to the mounting surface by fixing bolts
3. If a large number of radial load and/or moment is applied, it is recommended to prepare the flange part as Fig.4.